• Vibration isolation in all directions.
  • Noise attenuation.
  • Easy installation because of one-piece design.
  • Low-cost installation.
  • Long service life.
  • Consistent performance because of permanently bonded design.
  • Shock protection in all directions provided by cushioned snubbing, no metal-to-metal bottoming.
  • Standard sizes available from stock.
  • Space-saving size.
  • Captive installation after overload failure when recommended bolt, washer and nut are used.
  • Accommodate English and Metric bolts.
Unit of Measure

Specifications

Maximum Axial Static Load Rating

N/A 700 lbs3110 N

Axial Static Spring Rate

N/A 7000 lbs/in1220 N/mm

Radial Static Spring Rate

N/A 20.000 lbs/in3.503 N/mm

Dimension A

N/A 3.75 in95.3 mm

Dimension B

N/A 3.62 in92.0 mm

Dimension C

N/A 1.020 in25.9 mm

Dimension D

N/A 1.50 in38.1 mm

Dimension E

N/A 1.05 in26.7 mm

Dimension F

N/A 0.72 in18.3 mm

Dimension G

N/A 2.03 in51.6 mm

Dimension H

N/A 2.80 in71.1 mm

Dimension J

N/A 2.47 in62.7 mm

Dimension K

N/A 2.470 in62.70 mm

Dimension L

N/A 0.96 in24.4 mm

Dimension SD (± 0.03)

N/A 2.500 in63.5 mm

Dimension R

N/A 4.00 in101.6 mm

Dimension T

N/A 0.75 in19.1 in

Size Imperial (Recommended Bolt Information)

N/A 1

Size Metric (Recommended Bolt Information)

N/A M24

Grade or Class SAE J429 (Recommended Bolt Information)

N/A 8

Grade or Class SAE J1199 (Recommended Bolt Information)

N/A 10.9
Rebound Washer Part Number1 N/A J-2049-76

Tolerances for Dimensions

N/A .xx = ± 0.03 in. (± 0.762 mm)
.xxx = ± 0.015 in. (± 0.381 mm)

General Description

N/A Center Bonded Mounts provide flexible suspension systems for mobile, transport-mounted or portable equipment. Typical applications include engines, cabs, fuel tanks, pumps, air conditioning units, compressors and industrial machinery.

Application Engineering Assistance

N/A Frequently, vibration isolation problems require a system engineering analysis. Lord has the computer capability, as well as specialized programs, for analyzing engine/ transmission combinations. The output from this analysis is a mounting proposal which optimizes performance over the complete range of operating speeds. This service is available to you upon request.

Note

N/A Mount assembly only furnished by Lord Corporation

  • 1 Rebound Washer: Steel, zinc plated Mounts are designed to be loaded in the axial direction only. If bracket provides support equal to top rebound washer, Diameter A top rebound washer is not required.
    Required for all installations; tabulation for part number.