Astro-Tex Co., Inc. | Industrial Rubber Products Since 1974Astro-Tex Co., Inc. | Industrial Rubber Products Since 1974
All Categories > Lord Vibration Mounts > Center Bonded Mounts > CBA Series Center Bonded Mounts > Item # CBA24-650  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # CBA24-650, CBA Series Center Bonded Mounts


  • Vibration isolation in all directions.
  • Noise attenuation.
  • Easy installation because of one-piece design.
  • Low-cost installation.
  • Long service life.
  • Consistent performance because of permanently bonded design.
  • Shock protection in all directions provided by cushioned snubbing, no metal-to-metal bottoming.
  • Standard sizes available from stock.
  • Space-saving size.
  • Captive installation after overload failure when recommended bolt, washer and nut are used.
  • Accommodate English and Metric bolts.




Specifications  · Installation Dimensions  · General Description  · Application Engineering Assistance  · Note

Specifications

Color Code
Orange

Maximum Axial Static Load Rating at Deflection
2891 N at 2.5 mm
650 lbs at 0.1 in

Dimension A (± 0.015)
59.7 mm

Dimension B
0.657 in
16.5 mm

Dimension C (± 0.015)
1.50 in
38.1 mm

Dimension D (± 0.02)
2.11 in
53.6 mm

Dimension E (± 0.015)
1.50 in
38.1 mm

Dimension F (± 0.02)
0.69 in
17.5 mm

Metal Parts
Low Carbon Steel

Size Imperial (Recommended Bolt Information)
5/8

Size Metric (Recommended Bolt Information)
M16

Grade or Class SAE J429 (Recommended Bolt Information)
2

Grade or Class SAE J1199 (Recommended Bolt Information)
5.8

Nominal Dynamic - Static Spring Rate Ratio1
1.19

Tolerances for Dimensions
.xx = ± 0.03 in. (± 0.762 mm)
.xxx = ± 0.015 in. (± 0.381 mm)

Washer
J-2049-53, Head Washer
J-2049-67, Tail Washer
1 This figures can be used to calculate dynamic spring rate or natural frequency based on static values.

(K DYN = KST x DYN/STATIC Ratio)


Installation Dimensions

Dimension H
0.62 in
15.7 mm

Dimension I
2.75 in
69.9 mm

Dimension K
2.50 in
63.5 mm

Dimension SD (± 0.03)
1.38 in
35.1 mm

Dimension R (± 0.015)
0.06 in
1.5 mm

Dimension T (± 0.03)
0.62 in
15.7 mm


General Description
Center Bonded Mounts provide flexible suspension systems for mobile, transport-mounted or portable equipment. Typical applications include engines, cabs, fuel tanks, pumps, air conditioning units, compressors and industrial machinery.


Application Engineering Assistance
Frequently, vibration isolation problems require a system engineering analysis. Lord has the computer capability, as well as specialized programs, for analyzing engine/ transmission combinations. The output from this analysis is a mounting proposal which optimizes performance over the complete range of operating speeds. This service is available to you upon request.


Note
Mounts and washers supplied by Lord.
Washers must be ordered separately.


 MORE IMAGES 

·  Installation View of CBA Series Center Bonded Mounts


 DOWNLOADS 

Center Bonded Mounts
(PDF, 22KB)