Request Information
  • Vibration isolation in all directions.
  • Noise attenuation.
  • Easy installation because of one-piece design.
  • Low-cost installation.
  • Long service life.
  • Consistent performance because of permanently bonded design.
  • Shock protection in all directions provided by cushioned snubbing, no metal-to-metal bottoming.
  • Standard sizes available from stock.
  • Space-saving size.
  • Captive installation after overload failure when recommended bolt, washer and nut are used.
  • Accommodate English and Metric bolts.
Unit of Measure

Specifications

Maximum Axial Static Load Rating at Deflection1 N/A 2224 N at 3 mm 500 lbs at 0.12 in

Typical Axial Spring Rate

 N/A 4200 lbs/in736 N/mm

Typical Radial Spring Rate

 N/A 5300 lbs/in927 N/mm
Metal Bracket Part Number2 N/A Y-30266-3-1

Dimension A

 N/A 4.25 in108.0 mm

Dimension B

 N/A 0.50 in12.7 mm

Minimum Diameter C

 N/A 0.404 in10.3 mm

Maximum Diameter C

 N/A 0.412 in10.5 mm

Dimension D

 N/A 2.50 in63.5 mm

Minimum Inner Diameter E

 N/A 0.639 in16.2 mm

Maximum Inner Diameter E

 N/A 0.657 in16.7 mm

Outer Diameter

 N/A 0.88 in22.3 mm

Dimension F

 N/A 3.50 in88.9 mm

Dimension G

 N/A 0.82 in20.8 mm

Dimension H

 N/A 0.13 in3.3 mm

Dimension I

 N/A 2.35 in59.7 mm

Dimension J

 N/A 1.50 in38.1 mm

Dimension K

 N/A 2.19 in55.6 mm
Minimum M3 N/A 2.75 in69.9 mm

Dimension N

 N/A 0.76 in19.3 mm

Dimension SD (± 0.03)

 N/A 2.25 in57.2 mm
Minimum T4 N/A 0.38 in9.7 mm
Maximum T5 N/A 0.50 in12.7 mm

Washer Part Number

 N/A J-2049-53

Inner Diameter

 N/A 0.64 in16.3 mm

Thickness

 N/A 0.125 in3.2 mm

Tolerances for Dimensions

 N/A .xx = ± 0.03 in. (± 0.762 mm)
.xxx = ± 0.015 in. (± 0.381 mm)

Washer

 N/A , Head Washer

General Description

N/A Center Bonded Mounts provide flexible suspension systems for mobile, transport-mounted or portable equipment. Typical applications include engines, cabs, fuel tanks, pumps, air conditioning units, compressors and industrial machinery.

Application Engineering Assistance

N/A Frequently, vibration isolation problems require a system engineering analysis. Lord has the computer capability, as well as specialized programs, for analyzing engine/ transmission combinations. The output from this analysis is a mounting proposal which optimizes performance over the complete range of operating speeds. This service is available to you upon request.

Note

N/A Mount and washer only furnished by Lord.
All metal parts are made of low carbon steel.

  • 1 These ratings are for general industrial applications. For on-highway use 80% of loads shown. For off-highway use 70% of loads shown.
  • 2 If you require a high bolt torque series or any other special part, use metal bracket part number and the CBA part number, contact the application department for assistance.
  • 3 Bracket must provide support in excess of M Dia. Min., otherwise a washer is required. Washer must be ordered separately.
  • 4 Minimum supporting member thickness for high rebound load capacities.
  • 5 Maximum supporting member thickness for all applications.