Request Information
  • Economical.
  • Offer improved reliability in environments where harsh vibration and shock occur.
  • Space saving.
  • Oil resistant.
  • Effective vibration isolation and shock protection for light load applications.
Unit of Measure

Specifications

Elastomer

 N/A Oil Resistant

Maximum Axial Load

 N/A 4 lbs18 N

Axial Spring Rate

 N/A 65 lbs/in11.4 N/mm

Radial Spring Rate

 N/A 65 lbs/in11.4 N/mm
Spacer Length1 N/A 0.455 in11.6 mm

Spacer Outer Diameter

 N/A 0.195 in5.0 mm
Thickness2 N/A 0.062 in
Thickness (± 0.005 (± 0.127 mm))3 N/A 1.6 mm
Diameter4 N/A 0.735 in
Diameter (± 0.005 (± 0.127 mm))5 N/A 18.7 mm

General Description

N/A Lord Grommet Isolators are designed and produced with the same kind of precision and care as our high performance bonded elastomeric mounts. This provides close control of stiffness and dimensions. You get the performance and quality you need at low cost.

Standard Grommet Isolators are made of neoprene and natural rubber. They provide good vibration isolation for disturbing frequencies above 30 Hz. Damped Grommet Isolators are made of SPE®/D Elastomer. They are well suited to applications which involve limited sway space.

Note

N/A Not recommended for Radial Static Load.

  • 1 Spacer recommended for positive tightening if ferrule is not used. Not supplied by Lord.
  • 2 Support member plate
  • 3 Support member plate
  • 4 Support member plate
  • 5 Support member plate