Astro-Tex Co., Inc. - CB-2200 Series Two-Piece Mounts

Two-Piece Mounts are designed for applications involving severe dynamic forces in the static load direction, as well as the rebound direction. Travel is limited in both directions by rubber in compression which provides snubbing.

Request Information

Unit of Measure

Items	CB-2201-1 CB-2200 Series Two-Piece Mounts	CB-2201-2 CB-2200 Series Two-Piece Mounts	CB-2201-3 CB-2200 Series Two-Piece Mounts	CB-2201-4 CB-2200 Series Two-Piece Mounts	CB-2201-5 CB-2200 Series Two-Piece Mounts
Description	N/A Dynamically effective in all directions. Prevent mechanical transmission of noise. Accommodate misalignment and distortion. High rebound capacity. Easy to install with common tools. Standard bolt torque assures proper assembly. Top and bottom parts alike, cannot be misassembled. Fail-safe assembly. Sized for English and Metric bolts. Long dependable service life. Economical.
Elastomer	N/A Natural Rubber
Color Code	N/A Red	N/A Yellow	N/A Green	N/A Blue	N/A Purple
T - Thick Support Plate (Recommended) - Thickness - T	N/A 0.375 in9.5 mm
T - Thin Support Plate (Optional) - Thickness - T	N/A 0.375 in9.5 mm
T - Thick Support Plate (Recommended) - Load/Deflection	N/A 178 N at 1.3 mm 40 lbs at 0.05 in	N/A 400 N at 1.3 mm 90 lbs at 0.05 in	N/A 140 lbs at 0.05 in 623 N at 1.3 mm	N/A 1112 N at 1.3 mm 250 lbs at 0.05 in	N/A 1334 N at 1.3 mm 300 lbs at 0.05 in
T - Thin Support Plate (Optional) - Load/Deflection	N/A 178 N at 1.3 mm 40 lbs at 0.05 in	N/A 400 N at 1 mm 90 lbs at 0.05 in	N/A 140 lbs at 0.05 in 623 N at 1.3 mm	N/A 1112 N at 1.3 mm 250 lbs at 0.05 in	N/A 1334 N at 1.3 mm 300 lbs at 0.05 in
Dimension A	N/A 1.28 in1.34 in33.3 mm
Dimension B	N/A 0.387 in0.407 in10.08 mm
Reference Dimension C	N/A 0.58 in14.7 mm
Dimension D	N/A 1.22 in1.28 in31.8 mm
Dimension E	N/A 0.76 in0.82 in20.1 mm
Dimension F	N/A 0.455 in0.515 in12.3 mm
Dimension G	N/A 0.58 in0.62 in15.2 mm
Reference H for Thick Support Plate	N/A 0.44 in11.2 mm
Reference H for Thin Support Plate	N/A 0.44 in11.2 mm
Dimension S_D	N/A 0.73 in0.77 in19.1 mm
Dimension R Ref	N/A 0.04 in1.0 mm
Size Imperial (Recommended Bolt Information)	N/A 3/8
Size Metric (Recommended Bolt Information)	N/A M10
Grade or Class SAE J429 (Recommended Bolt Information)	N/A 5
Grade or Class SAE J1199 (Recommended Bolt Information)	N/A 5.8
Washer Part Number	N/A J-2049-89
Outer Diameter	N/A 1.56 in39.6 mm
Inner Diameter	N/A 0.391 in9.9 mm
Thickness	N/A 0.09 in2.3 mm
Washer	N/A J-2049-89, Washer
General Description	N/A These mounts are designed to support engines, cabs and accessory units, accommodate frame racking and twisting while isolating vibration and absorbing shock. Typical applications for Two-Piece Mounts include on-highway, off-highway vehicles, construction and industrial machines.
Note	N/A Mounts only supplied by Lord One P/N contains one top and one bottom mount only Caution: When using the maximum bolt torque listed a hardened (RB95) rebound washer and support member should be used. A hardened washer may be placed under the supported member when the supported member is not hardened. Material is SAE 1008-1015 steel zinc plated and chromate treated.	N/A Non-Stock Item, please contact Lord Corporation for availability. Mounts only supplied by Lord One P/N contains one top and one bottom mount only Caution: When using the maximum bolt torque listed a hardened (RB95) rebound washer and support member should be used. A hardened washer may be placed under the supported member when the supported member is not hardened. Material is SAE 1008-1015 steel zinc plated and chromate treated.	N/A Non-Stock Item, please contact Lord Corporation for availability. Mounts only supplied by Lord One P/N contains one top and one bottom mount only Caution: When using the maximum bolt torque listed a hardened (RB95) rebound washer and support member should be used. A hardened washer may be placed under the supported member when the supported member is not hardened. Material is SAE 1008-1015 steel zinc plated and chromate treated.	N/A Non-Stock Item, please contact Lord Corporation for availability. Mounts only supplied by Lord One P/N contains one top and one bottom mount only Caution: When using the maximum bolt torque listed a hardened (RB95) rebound washer and support member should be used. A hardened washer may be placed under the supported member when the supported member is not hardened. Material is SAE 1008-1015 steel zinc plated and chromate treated.	N/A Non-Stock Item, please contact Lord Corporation for availability. Mounts only supplied by Lord One P/N contains one top and one bottom mount only Caution: When using the maximum bolt torque listed a hardened (RB95) rebound washer and support member should be used. A hardened washer may be placed under the supported member when the supported member is not hardened. Material is SAE 1008-1015 steel zinc plated and chromate treated.