Request Information
Conical mounts from Lord Corporation provide effective vibration isolation and noise attenuation with a simple, robust mount design. Consistent performance, high load bearing capabilities and a choice of radial stiffness characteristics are key features of these mounts. For more demanding vibration and noise reduction requirements, Lord integrates conical mounts with surface-effect technology to form an advanced control solution known as Hystec™ Systems.
Unit of Measure

Specifications

Durometer Shore A

 N/A 40

Rated Axial Static Load

 N/A 1.1 kN250 lbs

Rated Axial Static Deflection

 N/A 5.0 mm0.20 in

Axial Static Stiffness

 N/A 150 N/mm860 lbs/in
Axial Dynamic Stiffness1 N/A 160 N/mm915 lbs/in

Radial Static Stiffness R1

 N/A 850 N/mm4855 lbs/in

Rated Static Stiffness R2

 N/A 400 N/mm2285 lbs/in

Size Imperial (Recommended Bolt Information)

 N/A 5/8

Size Metric (Recommended Bolt Information)

 N/A M16

Grade or Class SAE J429 (Recommended Bolt Information)

 N/A 5

Grade or Class SAE J1199 (Recommended Bolt Information)

 N/A 9.8

General Description

N/A Conical mounts are appropriate for both on-road and off-road vehicles. Applications include cab mounts and engine and transmission mounts for trucks and buses, and construction and agricultural vehicles.

The mounts:

  • Provide strong, dependable performance
  • Have a typical static deflection of 5mm
  • Offer a choice of radial stiffnesses
  • Can be snubbed
  • Can be safetied with the use of snubbing washers
  • Withstand R.O.P.S. loads with the addition of support rings
  • Are easily installed
  • Exhibit long, highly reliable service life

Note

N/A Data at Axial Load and Dynamic Axial Motion of +- 0.5 mm.

  • 1 Data at Axial Rated Static Load, with input + 0.3 mm (0.01 in.) at 5.0 Hz.