ASTRO-TEX CO., INC.
ASTRO-TEX CO., INC.
2512 Summit Ave, Suite 311
Plano, TX 75074
Tel: 972.424.8707
Fax: 972.422.9791
Email: sales@astrotex.com
Website: www.AstroTex.com
Print Back
Two-Piece Mounts are designed for applications involving severe dynamic forces in the static load direction, as well as the rebound direction. Travel is limited in both directions by rubber in compression which provides snubbing.
Two-Piece Mounts
SSB Series Two-Piece Mounts
Unit of Measure
Items Two-Piece Mounts
SSB20-1000-2
SSB Series Two-Piece Mounts 		Two-Piece Mounts
SSB20-1000-4
SSB Series Two-Piece Mounts 		Two-Piece Mounts
SSB26-1000-1
SSB Series Two-Piece Mounts 		Two-Piece Mounts
SSB26-1000-5
SSB Series Two-Piece Mounts 		Two-Piece Mounts
SSB33-1000-2
SSB Series Two-Piece Mounts
Description N/A
  • Dynamically effective in all directions.
  • Prevent mechanical transmission of noise.
  • Accommodate misalignment and distortion.
  • High rebound capacity.
  • Easy to install with common tools.
  • Standard bolt torque assures proper assembly.
  • Top and bottom parts alike, cannot be misassembled.
  • Fail-safe assembly.
  • Sized for English and Metric bolts.
  • Long dependable service life.
  • Economical.
Manufacturing Part Number N/A J-7401-27 N/A J-7401-29 N/A J-3049-67 N/A J-3049-70 N/A SSB33-1001-2
Spacer Part Number N/A Y-30100-7-1 N/A Y-30100-7-1 N/A Y-30100-7-1 N/A Y-30100-7-1 N/A Y-32190-1-1
Load for Maximum Axial Static Load Rating1 N/A 185 lbs at 0.035 in 825 N at 0.9 mm N/A 1335N at 1.02 mm 300 lbs at 0.04 in N/A 1780N at 0.9 mm 400 lbs at 0.035 in N/A 3050 N at 1.02 mm 685lbs at 0.04 in N/A 2780 N at 1.15 mm 625 lbs at 0.045 in
Axial Spring Rate N/A 4970 lbs/in890 N/mm N/A 8120 lbs/in1430 N/mm N/A 11000 lbs/in1930 N/mm N/A 17900 lbs/in3215 N/mm N/A 15200 lbs/in2650 N/mm
Radial Spring Rate N/A 560 lbs/in97 N/mm N/A 910 lbs/in160 N/mm N/A 1370 lbs/in240 N/mm N/A 2230 lbs/in392 N/mm N/A 2220 lbs/in385 N/mm
Dimension A N/A 2.22 in56.4 mm N/A 2.22 in56.4 mm N/A 2.62 in66.5 mm N/A 2.62 in66.5 mm N/A 3.24 in82.3 mm
Dimension B N/A 2.00 in50.8 mm N/A 2.00 in50.8 mm N/A N/A N/A 3.21 in81.5 mm
Dimension C N/A 0.81 in20.6 mm
Dimension D N/A 0.125 in3.2 mm
Dimension E N/A 1.81 in46.0 mm
Dimension F N/A 1.38 in3.50 mm N/A 1.38 in3.50 mm N/A 1.38 in35.0 mm N/A 1.38 in35.0 mm N/A 1.84 in46.7 mm
Dimension H N/A 0.31 in7.9 mm N/A 0.31 in7.9 mm N/A 0.31 in7.9 mm N/A 0.31 in7.9 mm N/A 0.29 in7.4 mm
Dimension I N/A 0.51 in12.9 mm N/A 0.51 in12.9 mm N/A 0.51 in12.9 mm N/A 0.51 in12.9 mm N/A 0.765 in19.4 mm
Dimension K N/A 2.06 in52.3 mm
Dimension SD (± 0.015) N/A 1.40 in35.6 mm N/A 1.40 in35.6 mm N/A 1.40 in35.6 mm N/A 1.40 in35.6 mm N/A 1.87 in47.6 mm
Dimension R N/A 0.07 in by 45º 1.8 mm by 45º N/A 0.07 in by 45º 1.8 mm by 45º N/A 0.07 in by 45º 1.8 mm by 45º N/A 0.07 in by 45º 1.8 mm by 45º N/A
Dimension T N/A 0.625 in15.9 mm
Size Imperial (Recommended Bolt Information) N/A 1/2 N/A 1/2 N/A 1/2 N/A 1/2 N/A 3/4
Size Metric (Recommended Bolt Information) N/A M12 N/A M12 N/A M12 N/A M12 N/A M18
Grade or Class SAE J429 (Recommended Bolt Information) N/A 2 N/A 2 N/A 2 N/A 2 N/A 8
Grade or Class SAE J1199 (Recommended Bolt Information) N/A 5.8 N/A 5.8 N/A 5.8 N/A 5.8 N/A 10.9
Tolerances for Dimensions N/A .xx Decimals ± 0.03 (0.76)
.xxx Decimals ± 0.01 (0.254)
Angles ± 2°
General Description N/A These mounts are designed to support engines, cabs and accessory units, accommodate frame racking and twisting while isolating vibration and absorbing shock.
Typical applications for Two-Piece Mounts include on-highway, off-highway vehicles, construction and industrial machines.
Note N/A All parts made of low carbon steel.
For applications in severe oil environments, contact Lord Corporation. Based on extensive experience, Two-Piece Mounts have been designed to operate in normal fluid, temperature and other environmental conditions such as found in the engine compartment of on- and off-highway applications.
  • 1 These loads are for on-highway and general industrial use. For off-highway, use 80% of the load shown.