Astro-Tex Co., Inc. | Industrial Rubber Products Since 1974Astro-Tex Co., Inc. | Industrial Rubber Products Since 1974
All Categories > Lord Vibration Mounts > Two-Piece Mounts > SSB Series Two-Piece Mounts > Item # SSB33-1000-4  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # SSB33-1000-4, SSB Series Two-Piece Mounts


  • Dynamically effective in all directions.
  • Prevent mechanical transmission of noise.
  • Accommodate misalignment and distortion.
  • High rebound capacity.
  • Easy to install with common tools.
  • Standard bolt torque assures proper assembly.
  • Top and bottom parts alike, cannot be misassembled.
  • Fail-safe assembly.
  • Sized for English and Metric bolts.
  • Long dependable service life.
  • Economical.




Specifications  · Installation Dimensions  · General Description  · Note

Specifications

Manufacturing Part Number
SSB33-1001-4

Spacer Part Number
Y-32190-1-1

Load for Maximum Axial Static Load Rating1
1125 lbs at 0.03 in
5005 N at 0.76 mm

Axial Spring Rate
37500 lbs/in
6566 N/mm

Radial Spring Rate
3890 lbs/in
675 N/mm

Dimension A
3.24 in
82.3 mm

Dimension B
3.21 in
81.5 mm

Dimension C
0.81 in
20.6 mm

Dimension D
0.125 in
3.2 mm

Dimension E
1.81 in
46.0 mm

Dimension F
1.84 in
46.7 mm

Dimension H
0.29 in
7.4 mm

Dimension I
0.765 in
19.4 mm

Size Imperial (Recommended Bolt Information)
3/4

Size Metric (Recommended Bolt Information)
M18

Grade or Class SAE J429 (Recommended Bolt Information)
8

Grade or Class SAE J1199 (Recommended Bolt Information)
10.9

Tolerances for Dimensions
.xx Decimals ± 0.03 (0.76)
.xxx Decimals ± 0.01 (0.254)
Angles ± 2°
1 These loads are for on-highway and general industrial use. For off-highway, use 80% of the load shown.


Installation Dimensions

Dimension K
2.06 in
52.3 mm

Dimension SD (± 0.015)
1.87 in
47.6 mm

Dimension T
0.625 in
15.9 mm


General Description
These mounts are designed to support engines, cabs and accessory units, accommodate frame racking and twisting while isolating vibration and absorbing shock.
Typical applications for Two-Piece Mounts include on-highway, off-highway vehicles, construction and industrial machines.


Note
All parts made of low carbon steel.
For applications in severe oil environments, contact Lord Corporation. Based on extensive experience, Two-Piece Mounts have been designed to operate in normal fluid, temperature and other environmental conditions such as found in the engine compartment of on- and off-highway applications.


 MORE IMAGES 

·  Installation View of SSB Series Two-Piece Mounts