Item # J-16462-7, Leveling Mounts On Astro-Tex Co., Inc.

All Categories > Lord Vibration Mounts > Machinery Mounts > Leveling Mounts > Item # J-16462-7


	Item # J-16462-7, Leveling Mounts

High-efficiency, multi-directional isolation of low frequency vibration.
Extremely rugged and require no maintenance.
Easily installed.
Long service life.

larger image

larger image

Specifications · General Description · Installation · Note

Specifications

Maximum Load per Mount

4500 lbs
20017 N

Adjusting Bolt

3/4 - 10 UNC x 5 in
127 mm

Dimension D

6-1/4 in
158.8 mm

Dimension H - Height (Free)

1-5/8 in
41.3 mm

Weight

5.0 lbs
2.3 kg

Maximum Adjustment¹

1/2 in
12.7 mm

Vertical Natural Frequency

12 Hz

¹ Do not exceed this amount.

General Description

Lattice Mounts are recommended for applications where disturbing frequencies are as low as 6 Hz. Their lattice design provides a soft vertical spring rate combined with lateral stability. Typical applications include shakerscreens, sifters, rubber mills, air compressors and large engines/generators.

Chan-L™ Mounts are recommended for machines where vertical disturbing frequencies are 600 cpm or higher. Their elastomer-supported channel design features a soft vertical spring rate. The design incorporates built-in protection against metal-to-metal bottoming. Typical applications include separating and grading screens and shakeouts.

Leveling Mounts provide the ability to level equipment and machinery. These mounts offer a vertical natural frequency under maximum load of 12 Hz. They are constructed of a neoprene elastomer, which resists oil, ozone and caustic materials, and a high-visibility yellow housing made of high strength steel.

Industrial Shockmounts efficiently control shock and structural noise transmission from heavy industrial machinery. Adjacent controls, sensitive instruments and precision machines are protected from impact disturbances which could hamper their performance. Worker comfort is increased, and building structures need less maintenance.

Installation

Before installing, be sure the mounts are the right ones for your machine.

Remove adjusting bolt and lock nut from mount.
Raise machine and slide mount under foot.
Insert adjusting bolt through clearance hole in foot and engage threads in mount.
Lower machine onto mounts.
Turn bolt until it bottoms.

Level machine by turning the adjusting bolt.
Tighten lock nut against machine base.

Note

Metal housing made of high strength steel - high visibility yellow paint (OSHA approved). Elastomer: neoprene compounded to resist oil, ozone and caustic material.
Adjustment bolt and lock nut included.
J-16462-7 has stainless steel bolt and hardware.

MORE IMAGES


	· Leveling Mounts - 3

Item # J-16462-7, Leveling Mounts