Astro-Tex Co., Inc. | Industrial Rubber Products Since 1974Astro-Tex Co., Inc. | Industrial Rubber Products Since 1974
All Categories > Lord Vibration Mounts > Center Bonded Mounts > CBA-50 Series Center Bonded Mounts > Item # CBA24-650-50  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # CBA24-650-50, CBA-50 Series Center Bonded Mounts


  • Vibration isolation in all directions.
  • Noise attenuation.
  • Easy installation because of one-piece design.
  • Low-cost installation.
  • Long service life.
  • Consistent performance because of permanently bonded design.
  • Shock protection in all directions provided by cushioned snubbing, no metal-to-metal bottoming.
  • Standard sizes available from stock.
  • Space-saving size.
  • Captive installation after overload failure when recommended bolt, washer and nut are used.
  • Accommodate English and Metric bolts.




Specifications  · General Description  · Application Engineering Assistance  · Note

Specifications

Maximum Axial Static Load Rating at Deflection1
2891 N at 3 mm
650 lbs at 0.12 in

Typical Axial Spring Rate
5400 lbs/in
945 N/mm

Typical Radial Spring Rate
7500 lbs/in
1313 N/mm

Metal Bracket Part Number2
Y-30266-3-1

Dimension A
4.25 in
108.0 mm

Dimension B
0.50 in
12.7 mm

Minimum Diameter C
0.404 in
10.3 mm

Maximum Diameter C
0.412 in
10.5 mm

Dimension D
2.50 in
63.5 mm

Minimum Inner Diameter E
0.639 in
16.2 mm

Maximum Inner Diameter E
0.657 in
16.7 mm

Outer Diameter
0.88 in
22.3 mm

Dimension F
3.50 in
88.9 mm

Dimension G
0.82 in
20.8 mm

Dimension H
0.13 in
3.3 mm

Dimension I
2.35 in
59.7 mm

Dimension J
1.50 in
38.1 mm

Dimension K
2.19 in
55.6 mm

Minimum M3
2.75 in
69.9 mm

Dimension N
0.76 in
19.3 mm

Dimension SD (± 0.03)
2.25 in
57.2 mm

Minimum T4
0.38 in
9.7 mm

Maximum T5
0.50 in
12.7 mm

Washer Part Number
J-2049-53

Inner Diameter
0.64 in
16.3 mm

Thickness
0.125 in
3.2 mm

Tolerances for Dimensions
.xx = ± 0.03 in. (± 0.762 mm)
.xxx = ± 0.015 in. (± 0.381 mm)

Washer
J-2049-53, Head Washer
1 These ratings are for general industrial applications. For on-highway use 80% of loads shown. For off-highway use 70% of loads shown.
2 If you require a high bolt torque series or any other special part, use metal bracket part number and the CBA part number, contact the application department for assistance.
3 Bracket must provide support in excess of M Dia. Min., otherwise a washer is required. Washer must be ordered separately.
4 Minimum supporting member thickness for high rebound load capacities.
5 Maximum supporting member thickness for all applications.


General Description
Center Bonded Mounts provide flexible suspension systems for mobile, transport-mounted or portable equipment. Typical applications include engines, cabs, fuel tanks, pumps, air conditioning units, compressors and industrial machinery.


Application Engineering Assistance
Frequently, vibration isolation problems require a system engineering analysis. Lord has the computer capability, as well as specialized programs, for analyzing engine/ transmission combinations. The output from this analysis is a mounting proposal which optimizes performance over the complete range of operating speeds. This service is available to you upon request.


Note
Mount and washer only furnished by Lord.
All metal parts are made of low carbon steel.


 MORE IMAGES 

·  Installation View of CBA-50 Series Center Bonded Mounts


 DOWNLOADS 

Center Bonded Mounts
(PDF, 22KB)