Astro-Tex Co., Inc. | Industrial Rubber Products Since 1974Astro-Tex Co., Inc. | Industrial Rubber Products Since 1974
All Categories > Lord Vibration Mounts > Couplings > Dynaflex® LCD Series Couplings > Item # LCD-1000-X-A  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # LCD-1000-X-A, Dynaflex® LCD Series Couplings


Application attachment means:
  • Flywheel to shaft.
  • Flywheel to hub (splined).
  • Shaft to shaft.
  • Floating shaft.
  • Many others.




Specifications  · General Description

Specifications

Shaft Rating at 2000 rpm
75 to 2000 hp

Capacity per 100 rpm
52.91 hp
39.47 kW

Torque Rating TN1
32000 lbs-in
3616 N-m

Approximate Slip Torque2
150000 lbs-in
16.95 N-m

Torsional Rate kØ3
250000 lbs-in/rad
28250 N-m/rad

Axial Rate KA
3250 lbs/in
600 N/mm

Radial Rate KR
20000 lbs/in
3500 N/mm

Weight Mass
105 lbs
47.62 kg

Inner Member Inertia
3.51 lbs-in-sec2
0.397 kg-m2

Outer Member Inertia
14.57 lbs-in-sec2
1.647 kg-m2

Pilot Outer Diameter4
19.000 in
482.60 mm

B.C. Diameter
18.125 in
460.37 mm

Diameter C
8.825 in
224.16 mm

Diameter D5
10.125 in
257.18 mm

Diameter E
11.52 in
292.61 mm

Length F
4.00 in
101.60 mm

Length G
0.125 in
3.18 mm

Length H
0.25 in
6.35 mm

Length J
1.00 in
25.40 mm

Hole Diameter K
0.406 in
10.31 mm

Number of Holes L
12

Hole Size M
5/8-11 UNC-2B in

Number of Holes N
8

Fits SAE Flywheel Number6
14 or 140 with Adapter
1 Prolonged exposure to temperatures in the 0 ºF range and below produces a significantly reduced slip torque prior to driveline warm-up. This condition may result in the coupling's inability to transmit adequate drive torque for applications experiencing unusual cold temperature related parasitic loading.
2 Prolonged exposure to temperatures in the 0 ºF range and below produces a significantly reduced slip torque prior to driveline warm-up. This condition may result in the coupling's inability to transmit adequate drive torque for applications experiencing unusual cold temperature related parasitic loading.
3 Prolonged exposure to temperatures in the 0 ºF range and below produces a significantly reduced slip torque prior to driveline warm-up. This condition may result in the coupling's inability to transmit adequate drive torque for applications experiencing unusual cold temperature related parasitic loading.
4 Pilot diameter tolerances are + 0.000/ -0.005 in. for "A" and + 0.005/ -0.000 in. for "C" diameters.
5 Pilot diameter tolerances are + 0.000/ -0.005 in. for "A" and + 0.005/ -0.000 in. for "C" diameters.
6 Refer to SAE J620c for flywheel numbers 6-1/2, 10, 11-1/2, 16; to SAE J927a for numbers 60, 80, 100, 120, 160.


General Description
The Dynaflex coupling line has been developed to overcome numerous torsional problems associated with vehicular and industrial driveline systems. These couplings increase equipment life by protecting against torsional vibration, shock and misalignment. Other significant features and benefits are:

  • Vibration Isolation: extremely low torsional spring rate is achieved with the Dynaflex coupling, using elastomer in shear. This allows for low system natural frequencies and isolation of first mode driveline disturbances.

  • Damping at Resonance: the elastomer used in LCD couplings effectively reduces vibration at resonance.

  • Shock Protection: torsional shock loads are attenuated by large shear deflection of the elastomer. In the case of severe overloads, equipment damage is prevented by slippage between the elastomer and the outer housing.

  • Misalignment Accommodation: elastomer flexibility allows for angular, parallel and axial misalignment.

  • Long Service Life: Lord Dynaflex couplings have proven themselves under demanding and rugged service conditions.

  • Maintenance Free: elastomer flexibility accommodates all motion without wear, eliminates the need for lubrication.

  • Noise Reduction: no metal-to-metal contact; elastomer attenuates structure-borne noise and isolates vibration from components that would act as noise generators.

  • Attachment: fits many standard SAE flywheels.

  • Design Flexibility: standard rubber molds are used to produce each different size coupling shown in this catalog. Often it is necessary to change metal components for custom applications. This is common.

  • Systems Engineering: Lord has in-house computer capabilities for multi-mass torsional analysis to assist in proper coupling selection.


    		•


     DOWNLOADS 

    Dynaflex® LCD Series Coupling Typical Applications & Selection Guide
    (PDF, 1223KB)