Elastomeric bushing-type couplings accommodate misalignment, cushion torsional shock, and do not generate or transmit noise. Since relative motion is taken in the elastomer rather than sliding metal surfaces, no lubricant is involved or ever required. Dirt and grit cannot effect the coupling bushings. The elastomer has been compounded to provide long service life.
Unit of Measure

Specifications

Socket Diameter A

N/A 2.19 in55.6 mm

Dimension B

N/A 1.06 in26.9 mm

Radius C

N/A 0.25 in6.4 mm

C (Chamfer x 45 Degree)

N/A 0.19 in4.8 mm

Power Rated at 2000 rpm

N/A 10 to 600 hp

Application

N/A Driveline installations where multi-directional misalignment must be accommodated and torque loads are medium to high.

General Description

N/A Specification, selection and dimension information provided on the following pages facilitate design of the coupling assembly. The bushings are standard parts, and the flanges can be supplied by the end user or by Lord as a special design.

Note

N/A Lord does not supply hubs. Rubber elements only.
Non-Stock Item, please contact Lord Corporation for availability.